Our Cor-ten Planters are a new line of planters made from cor-ten steel and available in three different styles: square, rectangular, and tall. Finishes include untreated steel (the steel will naturally patina into a rusted color), and clear-coated (to maintain the original look).
1.Your Cor-Ten steel fire pit will arrive in the “unweathered” condition. You may see spots or weld marks, shinny spots or shinny grind marks on the fire pit. During the weathering process, these spots and marks will disappear.
2. The Weathering process depends on humidity. On average, the Cor-Ten steel fire pit will fully weather in about 3 months.
3. During the weathering process, your Cor- Ten steel fire pit may leach rust onto the surface it sits on. It is recommended that you protect any light colored surface during the weathering process.
4. You do not need to do anything to the Cor-Ten steel to maintain it’s finish. If you would like to smooth out the weathered surfaces, you can use a Scotch Brite pad to gently rub the steel. This will cause some of the rust barrier to break off and fall to the ground. Be sure to thoroughly clean the ground surface after this process. You can use water to clean the surfaces after this process.MATERIAL: corten weathering steel
FUEL: wood-burning or natural gas or propane 60,000-69,000 BTU/h, ETL listed (US & Canada) | 25 kW, CE (Europe) match-lit pilot with safety thermocouple or electronic ignition
TOPPING: river rock or lava pebble; featherock boulders optional
DIMENSIONS: 42”d x 9.25”h (1067d x 235h) Electronic 42”d x 13”h (1067d x 330h)
ACCESSORIES:
included: all-weather fabric cover
optional: aluminum table top
NOTE: Do not get water into any of the burner components. Water in the burner components can cause dangerous back pressure. If you think there is water in the burner components, call a licensed technician to check the burner components prior to use.